Leave Your Message

Mono 48v 390w 400w 410watt Premium Monocrystalline Thin Solar Panels

Sunnal mono half-cut single/double glass module,assembled with multi-busbar PERC technique and half-cut structure, which can not only absorb the energy from the front of the module, but also absorb the reflected light and the scattered light from the back,offer the advantages of higher power output,reduce shading effect on the energy generation,enhance the mechanical load bearing capacity as well.


    Multiple Busbars (MBB)

    Densely distributed grid lines, uniform load,multi-busbars design. Output power increased by more than 5W.

    Lossless cut: Lossless cutting technology, no mechanical damagesmooth cutting surface without burrs. Low cell cracking risks, micro-cracking is reduced by more than 50%.

    Half-cut: Current density is reduced by 1/2 Internal power loss reduced to 1/4 of conventional modules. Rated output power increased by 5~10W.

    New Welding Wire: Adopt round wire solder ribbon, low shading area. Multiple reflections of incident light, power increased by 1-2W.

    Shading, not compromising energy: Up-down symmetrical parallel module design Effectively reduce current mismatch due to shading.

    High-Density Encapsulation Technology: Adopts advanced high-density encapsulation technology to ensure the perfect balance of efficiency and reliability Module efficiency increased by more than 0.15%.

    Monocrystalline 1ug2
    Monocrystalline 2-3lwz

    Product Parameters

    Module Number: ANM 395 400 405 410 415
    Maximum Power Pmax (W) 395W 400W 405W 410W 415W
    Open circuit voltage·Voc (V) 45.3V 45.5V 45.7V 45.8V 45.9V
    Short circuit current Isc (A) 13.79A 13.86 A 13.92A 13.99A 14.04A
    Voltage at Maximum Power Vmp (V) 38.0V 38.2V 38.3V 38.5V 38.7V
    Current at Maximum Power Imp (A) 12.89A 12.97A 13.05A 13.12A 13.18A
    Module efficiency-n (%) 20.6% 20.8% 21.1% 21.3% 21.7%
    Power Tolerance 0~+3% 0~+3% 0~+3% 0~+3% 0~+3%
    STC: Irradiance 1000W/m², Module Temperature 25°c, Air Mass 1.5
    Mechanical Parameters
    Monocrystalline PERC Monocrystalline PERC 182x182mm
    Dimension 1730x1134x35mm
    Glass 3.2mm, High Transmission, Low Iron, Tempered Glass
    Junction Box IP65&IP67 Rated
    Output Cable Section Size: 4mm² , Length: 900mm
    Frame Anodized Aluminum Alloy
    No. of Bypass Diodes 6
    Connector MC4 Compatible
    Working Conditions
    Maximum System Voltage
    Operating Temperature -40°c~+85°c
    Maximum Series Fuse 15A
    NOCT 45±2°c
    Application Class Class A
    Temperature Coefficient
    Temperature Coefficient of Pmax -0.39%/°c
    Temperature Coefficient of Voc -0.29%/°c
    Monocrystalline 4-5nfl
    Monocrystalline 6zmu
    Monocrystalline 7qu2
    Monocrystalline 9ved
    Monocrystalline 10w57
    Monocrystalline 11-12qwr


    Leave Your Message